Advanced Search
Advanced search
|
3½" Condenser Lens Assembly for Omega 4x5 Enlargers - Used
...The assembly consists of the two 3 condenser lenses, the condenser housing or spinning, and the lens spacer...If you have the DV variable condenser lamphouse, this assembly is not required...
Our price: CA$220.00
Focus Assembly for Omega C760 Enlargers - Remanufactured
... Early Omega C760 enlargers were fitted with a focus assembly that employed semi-soft friction rollers made of a polyurethane material...The standard repair for the early models was to replace the entire original focus assembly with the later design...
Our price: CA$220.00
Variable Condenser Lens Assembly for Omega DV Condenser Lamphouse - Used
... Omega #472-105 auxiliary condenser lens assembly for the DV 4x5 Variable Condenser lamphouse...This is the complete assembly with the lens supplied mounted in the metal frame...
Our price: CA$194.50
Heat Absorbing Glass Assembly for the Omega C760 Dichroic Colorhead
... This is a replacement heat absorbing glass assembly for the Omega C760 Dichroic lamphouse...This assembly also fits the C700 Dichroic lamphouse and can be used to replace the heat filter in the earlier Chromega B Dichroic lamphouse...
Our price: CA$78.50
Focus Knob Assembly for Omega D5500 and C760 Enlargers
...These are the knobs used for focus adjustment on Omega D5500, ProLab II, and C760 enlargers. On the C760, the same knob is used for the fine elevation control. Supplied with set screw. Note: Replaces part # 9-301-0194 in the C760 parts...
Our price: CA$24.50
Lamp Chamber Cover Assembly for LPL 7700 and Saunders/LPL 670XL Enlargers
... OEM replacement lamp chamber cover assembly for LPL 7700 Dichroic and VCCE enlargers...
Our price: CA$98.50
Counterbalance Spring Assembly for Omega D5500 Enlargers
... This is the complete replacement counterbalance spring assembly for Omega D5500 and ProLab II 4x5 enlargers...The assembly consists of two new constant force negator springs on a refurbished mounting plate, properly assembled and lubricated, and ready to install on the enlarger....
Our price: CA$286.00
Brake Block Assembly for Omega D, E, and B-series Enlargers
... Replacement Elevation Brake Block assembly to fit Omega D-2, D-3, D-4, D-5, and D-6 4x5 enlargers, E-5, E-6, and Super Chromega E Dichroic 5x7 enlargers, and B-7, B-8, B-9, and B-10 6x9 enlargers...
Our price: CA$75.00
Hotshoe Foot Assembly for Sunpak 144D and 2000DZ Flash Units
... Replacement hot shoe foot assembly for SUNPAK Auto 144D and 2000DZ, Multi Dedicated thyristor flash units...The assembly is supplied with circuit board and wire leads attached, but if only the foot is required, it can be detached from the assembly by removing three small screws...
Our price: CA$20.50
Lamp Socket, Cord and Switch Assembly for Omega B-22 Enlargers - Used
... This is the lamp socket and AC power cable assembly as originally supplied with Omega B-22 condenser enlargers...
Our price: CA$59.50
|
Similar Search Words |
Your Recent Searches - You have no recent searches - |