Advanced search
![]() |
|
![]() |
4x5 Mixing Box for LPL and Saunders/LPL 4x5 Enlargers
...If the original 4x5 mixing chamber in your LPL, Saunders/LPL, or Omega/LPL 4x5 lamphouse has been lost or damaged, this is the proper replacement...Can be used with all negative formats...This 4x5 Mixing Chamber fits the following: LPL 7450, 7451, 7452, and 7452L 4x5 enlargers Omega/LPL 4500-II and 4550XLG 4x5 enlargers Saunders/LPL 4500, 4500-II, 4550XL and 4550XLG 4...
Our price: CA$385.00
90mm Autofocus Track for Omega D3 and D4 Enlargers - Used
...The tracks are used, so there will be minor cosmetic marking, but they are in perfect working condition...Note: For proper operation of the D-3 and D-4 autofocus systems, 90mm lenses must be mounted on a 2" high lens mount...
Our price: CA$135.00
Red Filter Assembly for De Vere / DeVere Enlargers
...The filter can be moved up or down on the mounting post as required, to keep the filter close to the front of the lens...A similar amber swingaway filter, cat...
Our price: CA$115.00
Amber Filter Assembly for De Vere / DeVere Enlargers
... Swingaway amber filter assembly for DeVere vertical enlargers...The filter can be moved up or down on the mounting post as required, to keep the filter close to the front of the lens...Note: This product has been discontinued and is no longer available The swingaway red filter is still available, see the link below in the Related Products section...
The price for this item is not set. You will enter the price provided in your quotation. Out of stock
Omega 39mm Enlarger Lens Retaining Ring
...Its important to note that this 39mm retaining ring supplied by Omega has an outside diameter of 45.5mm and can be used with all Omega enlargers, turrets and lens mounts...Other rings may be too large to fit properly...
Our price: CA$39.00
25mm to 39mm Enlarger Lens Thread Adapter
... These adapter rings allow Schneider enlarging lenses with 25mm x .5 mounting thread to be mounted on standard 39mm lensboards...
Our price: CA$36.00
50mm Enlarger Lens Mounting Flange
...Because there are a number of circumstances, such as thick lensboards or wooden lensboards, where retaining rings can't be used, some lenses with 50mm mounting thread are supplied with a lens flange...
Our price: CA$48.00
Light Attenuator Set for Omega C700 and C760 Colorheads
... Controlling exposures can be quite a challenge...You need your lamphouse to provide high light output so that exposure times are reasonable for large prints...To address this problem, a set of three light attenuators was included with the C700 and C760 Dichroic lamphouses...
Our price: CA$54.50
80mm Autofocus Track for Omega D3 and D4 Enlargers - Used
...The tracks are used, so there will be minor cosmetic marking, but they are in perfect working condition...Note: For proper operation of the D-3 and D-4 autofocus systems, 80mm lenses must be mounted on a 1½" high lens mount...
Our price: CA$135.00
Heavy Duty Fine Focus Control for LPL 4x5 and 7700 Enlargers
...Can be used to replace the standard Fine Focus Control on all LPL, Saunders/LPL, Jobo/LPL, and Omega/LPL 4x5 enlargers, and is an option for LPL and Jobo/LPL 7700, and Saunders/LPL and Omega/LPL ...
Our price: CA$174.00
|
Similar Search Words |
Your Recent Searches - You have no recent searches - |