Advanced search
|
|
|
|
|
4x5 Mixing Box for LPL and Saunders/LPL 4x5 Enlargers
...If the original 4x5 mixing chamber in your LPL, Saunders/LPL, or Omega/LPL 4x5 lamphouse has been lost or damaged, this is the proper replacement...Can be used with all negative formats...This 4x5 Mixing Chamber fits the following: LPL 7450, 7451, 7452, and 7452L 4x5 enlargers Omega/LPL 4500-II and 4550XLG 4x5 enlargers Saunders/LPL 4500, 4500-II, 4550XL and 4550XLG 4...
Our price: CA$385.00
Under-lens Filter Holder for Omega D5 and D6 Enlargers
...Primarily intended for the D5 and D6, it can also be fitted to the D2, D3, D4, plus E and F series enlargers by removing the existing mounting flange on the lens mounts for those enlargers...
Our price: CA$159.00
35mm Mixing Box for Omega D5500 Dichroic Enlargers
...The standard light mixing chamber supplied with the Omega D5500 Auto CLS Dichroic Lamphouse covers the full 4"x5" format of the enlarger...The 4x5 box can be used for all film formats, but when working with smaller film formats part of the light output is wasted, resulting in longer exposures...
Our price: CA$289.00
Heat Absorbing Glass for Omega D-series 4x5 Condenser Enlargers
...radiation from the light produced by the enlarging lamp, thus helping to protect filters and negatives from heat damage, and reducing the chance of negative popping which affects focus...Note: This size can be used with all Omega 4x5 condenser enlargers, but for those with the DV variable condenser lamphouse we recommend purchasing the 473-103 rectangular heat absorbing glass sp...
Our price: CA$115.00
35mm Mixing Box for LPL and Saunders/LPL 4x5 Enlargers
...rd 4x5 Mixing Chamber to provide approximately 2˝-stops increase in light output from your LPL 4x5 enlarger for printing 35mm and small format negatives...Can be used with all negative formats up to 35mm...
Our price: CA$295.00
Omega Chromega B Dichroic Lamphouse for B66, B22, and B600 Enlargers - Refurbished
...It can also be fitted to B600 and B635 enlarger chassis with the accessory #429-364 adapter kit...reater convenience and improved performance, these used heads have been modified and upgraded to use the same 85W 82V as used in the later C760 Dichroic lamphouse, and do not require an external ...
Our price: CA$395.00
Omega Super Chromega D Dichroic II Lamphouse - Refurbished
...For installation on Omega D-2, D-3, D-4, D-5, D-6, and ProLab II enlargers... D-3, D-4, D-5, D-6, and ProLab II chassis fade-free yellow, magenta, and cyan dichroic filters step-less filtration range from 0 - 170 for all three filters illuminated, color-coded fi...
Our price: CA$1650.00
Under Lens Filter Holder Assembly for Beseler 45MXT and 45V-XL Enlargers
... Because the lens stage on Beseler 45MXT and 45VXL enlargers was redesigned to accept the 3-lens turret, these models require a different under lens filter holder than is used on the older models...
Our price: CA$145.00
Clear Top Glass for Beseler 23C 6x9 Glass Negative Carriers
...Replacement clear glass for the Beseler #8074 6x9 glass roll film negative carrier, as supplied for 23C enlargers...Can also be used to replace the anti-Newton top glass in the #8072 6x9 glass carrier...
Our price: CA$45.00
Paterson High Speed Print Washer 12x16
...The 1216 model can hold one 11x14 (30x40cm or 24x30cm) print, or the dividers can be installed to keep two 8x10 (20.3x25.4cm) or four 5x7 (13x18cm)prints separated...Washes RC prints in approximately 2 to 4 minutes...
Our price: CA$152.50
|
|
Similar Search Words |
Your Recent Searches - You have no recent searches - |
Results for Pro be